Electrolyte ton bucket - Our company has obtained European CE certification
【Product Features】
Our company produces this type of stainless steel barrel, which uses S30408 stainless steel as the barrel material based on the properties of lithium salts. It has high strength and corrosion resistance, and uses S30408 stainless steel square steel as the frame to further enhance the product's resistance to impact, ensuring the safety of the product during transportation and storage during peacetime.
【Size specifications】
Length, width, and height: 1120 * 1120 * 1620mm, with a total volume of 996L. The inner and outer roughness of the tank body is Ra=0.2, and the outer frame is surface brushed.
【Raw Material Control】
Zhangjiagang Pohang board is selected, and the inner surface of the tank is made of ground board to ensure the roughness of the inner wall and comply with Rohs standards.
【Drop height experiment】
Before the experiment, IBCS should be filled with a mixture of water and sand that is not less than 95% of its capacity (adjust the density to be the same as the density of the weighed material), and the height of the test site should be raised from the impact surface. According to IMDG requirements, the drop height should be h=1.8m. No loss of contents, no leakage.
【Process characteristics】
The welding method of the tank body is different from GTAW and TIG processes, using a welding machine and a welding robot for the frame. Compared with traditional methods, the appearance of the welding seam is narrow and flat. At the same time, the welding seam strength, porosity control, and flaw detection test results have significantly improved.
